The FaunaPhotonics APS - Light sensor
L'APS de FaunaPhotonics - Capteur de lumière
The FaunaPhotonics APS is a technology that individual sensors on the spray boom make a real-time spray decision individually. The signal is then collected on the network and transmitted to the spray controller in the cab. The flash of a light is the function signal, following the connection to the 4640 and turning on the actual sprays which will allow to spray more when there are more harmful insects and spry less, when there are fewer insects or when there are beneficial insects’ insides. When see the light flash the insects are detected by the sensors. The advantages of this self-propelled sprayer are the high efficiency and the possibility of catching insects’ events over high crops. The stationary sensors are efficient in catching the first influx of the insects in the field so they can act as an early warming detection system so by mounting these sensors into a tractor is possible to find the hot spots or high densities of insects in the field. Using the sensor, it creates heat maps showing these high-density spots visually. The heat map is generated based on the number of insects per minute we see in the field and the reason to compose it is that the tractor may not be in each area of the field for the same amount of time. If you treat them as a monoculture and thus as a completely uniform space then what you miss is that there are actual differences in insect activity within a specific field so if you know exactly where the insects are or when they’re coming in then all of a sudden, you can precisely target those insects using precision agriculture.
L'APS de FaunaPhotonics est une technologie qui permet à des capteurs individuels situés sur la rampe de pulvérisation de prendre individuellement une décision de pulvérisation en temps réel. Le signal est ensuite collecté sur le réseau et transmis au contrôleur de pulvérisation dans la cabine. Le flash d'une lumière est le signal de fonction, suivant la connexion au 4640 et activant les pulvérisations réelles qui permettront de pulvériser plus lorsqu'il y a plus d'insectes nuisibles et de pulvériser moins, lorsqu'il y a moins d'insectes ou lorsqu'il y a des insectes bénéfiques à l'intérieur. En voyant le flash lumineux, les insectes sont détectés par les capteurs. Les avantages de ce pulvérisateur autopropulsé sont la grande efficacité et la possibilité d'attraper les événements des insectes sur des cultures élevées. Les capteurs stationnaires sont très efficaces pour capter le premier afflux d'insectes dans le champ, ils peuvent donc agir comme un système de détection précoce de réchauffement. En montant ces capteurs sur un tracteur, il est possible de trouver les points chauds ou les fortes densités d'insectes dans le champ. En utilisant le capteur, la date mobile crée des cartes de chaleur montrant visuellement ces points de haute densité. La carte de chaleur est générée sur la base du nombre d'insectes par minute que nous voyons dans le champ. La raison de la composer est que le tracteur peut ne pas être dans chaque zone du champ pendant la même durée. Si vous les traitez comme une monoculture et donc comme un espace complètement uniforme, vous ne voyez pas qu'il existe des différences réelles dans l'activité des insectes au sein d'un champ spécifique. Si vous savez exactement où se trouvent les insectes ou quand ils arrivent, vous pouvez tout à coup cibler précisément ces insectes en utilisant l'agriculture de précision.
SMART agriculture for innovative vegetable crop PROTECTion: harnessing advanced methodologies and technologies
Ongoing | 2020-2022
- Main funding source
- Horizon 2020 (EU Research and Innovation Programme)
- Geographical location
- Belgium