Thanks to the project, it is possible to reduce the volume of application. As a result of the implementation of the DOSAVIÑA and DOSA3D programs, a significant
Thanks to the project, it is possible to reduce the volume of application. As a result of the implementation of the DOSAVIÑA and DOSA3D programs, a significant reduction in the total and average volume applied is expected, by achieving reductions in those areas of lower vigor in the plot. This will result in lower water consumption and improved coverage of the treated target (on-target) and minimization of losses due to drift and deposition on the soil (off-target).
With the execution of the project, a device has been obtained with the capacity to be installed in any phytosanitary application equipment and to read, in a fast and intuitive way, the prescription maps elaborated from the DOSAVIÑA and/or DOSA3D programs, in this way the working pressure is automatically controlled according to the georeferenced location of the equipment, always respecting the limits established for an adequate phytosanitary treatment. Therefore, it has been possible to validate the DOSA3D system for the adjustment of the dose of phytosanitary treatments, the execution of zonal treatments based on vigor maps from images of the European satellite Sentinel 2 and the validation of new generation treatment equipment for a more sustainable use of phytosanitary products.
Likewise, it has been observed that from multispectral images transformed according to the NDVI index, from the Sentinel2 satellite, it is feasible to generate dose prescription maps adjusted by the DOSA3D system for the implementation of phytosanitary treatments in a simpler and more economical way than that established from images obtained by drone or airplane flight.
Gracias al proyecto, se permite reducir el volumen de aplicación. Como consecuencia de la implementación de los programas DOSAVIÑA y DOSA3D, se reduce el volumen total y medio aplicado, al conseguir reducciones en aquellas zonas de menor vigor en la parcela. Ello tiene como consecuencia un menor consumo de agua y una mejora de la cobertura del objetivo tratado (on-target) y minimización de las pérdidas por deriva y deposición en el suelo (off-target).
Con la ejecución del proyecto se ha obtenido un dispositivo con capacidad para ser instalado en cualquier equipo de aplicación de fitosanitarios y de leer, de forma rápida e intuitiva, los mapas de prescripción elaborados a partir de los programas DOSAVIÑA y/o DOSA3D, de esta manera se controla de forma automática la presión de trabajo en función de la ubicación georreferenciada del equipo, respetando siempre los límites establecidos para un adecuado tratamiento fitosanitario. Por lo tanto, se ha podido validar el sistema DOSA3D para el ajuste de la dosis de los tratamientos fitosanitarios., la ejecución de tratamientos zonales en base a mapas de vigor a partir de imágenes del satélite europeo Sentinel 2 y la validación de equipos de tratamientos de nueva generación para un uso más sostenible de los productos fitosanitarios.
Del mismo modo, se ha podido observar que a partir de imágenes multiespectrales transformadas según el índice NDVI, procedentes del satélite Sentinel2, es factible generar mapas de prescripción de dosis ajustada mediante el sistema DOSA3D para la realización de tratamientos fitosanitarios de forma más simple y económica a la establecida a partir de imágenes obtenidas mediante vuelo de dron o avión.
GOPHYTOVID: OPTIMISATION IN THE USE OF PHYTOSANITARY PRODUCTS IN VITICULTURE BASED ON VIGOUR MAPS.
Completed | 2018-2020
- Main funding source
- Rural development 2014-2020 for Operational Groups
- Geographical location
- Spain