The technological properties of the wood of standing trees have been characterized in 36 stands of the Pinus pinaster species distributed along Galicia and the
The technological properties of the wood of standing trees have been characterized in 36 stands of the Pinus pinaster species distributed along Galicia and the Cantabrian Coast. Plots with a radius of 14.1 m were established and speed measurements were made using the ST300 sonic equipment (Fibre-Gen NZ) and the density of the wood was calculated to classify the plots based on their technological properties for structural use.
It is shown that the quality of the structural wood of maritime pine increases with the age of the tree and for the same age it is better in the best station qualities, in areas of lower altitude and with little slope and in the most slender trees. The dynamic module increases fourfold for the age range, site indices and silvicultural management studied. The crown height, crown ratio and tree diameter can be controlled by pruning actions at height and thinning at the top in favor of codominant trees over dominant ones in the stand.
Linear models have been developed at plot level for the data set, relating the dynamic standing MOE with the values of the forest inventory and the physiographic variables. A GIS tool has been developed that integrates the algorithms to predict the Elastic Modulus and the resistant class of the wood of a tree and a forest stand based on sonic velocity, wood density and other tree, mass and station quality variables provided by the user or predicted based on remote data.
Se han caracterizado las propiedades tecnológicas de la madera del árbol en pie sobre 36 masas de la especie Pinus pinaster distribuidas a lo largo Galicia y Cornisa Cantábrica. Se establecieron parcelas de 14,1m de radio y se realizó la medición de la velocidad, usando el equipo sónico ST300 (Fibre-Gen NZ) y se calculó la densidad de la madera para clasificar las parcelas en base a sus propiedades tecnológicas para uso estructural.
Se demuestra que la calidad de la madera estructural del pino marítimo aumenta con la edad del árbol y para con la misma edad es mejor en las mejores calidades de estación, en zonas de menor altitud y con poca pendiente y en los árboles más esbeltos. El módulo dinámico se incrementa por cuatro para el rango de edades, índices de sitios y manejo selvícola estudiados. La altura de copa, razón de copa y diámetro del árbol pueden dirigirse mediante actuaciones de podas en altura y claras por lo alto en favor de los árboles codominantes frente a los dominantes en la masa.
Se han desarrollado modelos lineales, a nivel parcela para el conjunto de los datos, relacionando el MOE dinámico en pie con los valores del inventario forestal y las variables fisiográficas. Se ha desarrollado una herramienta SIG que integra los algoritmos para predecir el Módulo de elasticidad y la clase resistente de la madera de un árbol y de una masa forestal en base a velocidad sónica, densidad de madera y otras variables de árbol, de masa y de calidad de estación aportadas por el usuario o predichas en base a datos remotos.
SiGCa: Forest management systems in quality timber producing forests
Completed | 2018-2020
- Main funding source
- Rural development 2014-2020 for Operational Groups
- Geographical location
- Spain