Producing photovoltaic energy with the installation of panels on roofs of livestock buildings
Production d'énergie photovoltaïque avec l'installation de panneaux sur les toits des bâtiments d'élevage
Development of photovoltaic installations on beef farms, is growing. At the end of December 2020, the surface area installed in panels on livestock farm buildings in France was estimated at 10 million m2 however, there are still many roof surfaces that can be equipped.This innovation is particularly recommended for new building installations, as it is more difficult to install on existing buildings (problem of stability and insertion). It is estimated that 40% of new buildings constructed each year could be equipped, i.e. around 1.2 million potential m2 per year in France for cattle farming.
However, some constraints are the fact that buildings on cattle farms are not exposed directly to the south, and the slope of the roofs are not sufficient, which can reduce profitability by around 10%. The hours of sunshine, the orientation and inclination of the panels, the outside temperature and the maintenance of the installations largely explain the differences in performance between installations. It is considered that a system with sales of the electricity produced is particularly suitable for the beef sector, however the installation of such technology for self-consumption on the farm is not profitable on most beef farms. It is important to check the legal aspects of the electricity resale contract as depending on the geographical situation, there are barriers to the cost of connection to the electricity network.
A “decision support tool” is available for breeders and technicians who advise them. Experimental farms in France are also increasingly equipping themselves with the technology and can thus provide references and advice.
Les heures d'ensoleillement, l'orientation et l'inclinaison des panneaux, la température extérieure et l'entretien des installations expliquent en grande partie les différences de performance entre les installations. Le schéma d'un contrat de revente totale de l'électricité produite est particulièrement adapté aux toitures des bâtiments d'élevage et de stockage de fourrage pour la filière bovine. Un système d'autoconsommation de l'énergie photovoltaïque à la ferme n'est par contre pas adapté aux élevages bovins viande. Il est surtout important de vérifier les aspects juridiques du contrat de revente de l'électricité.
Le développement des installations photovoltaïques est en pleine croissance : à fin décembre 2020, la surface installée en panneaux sur les bâtiments d'élevage est estimée à 10 millions de m2. Il reste encore de nombreuses surfaces de toitures qui peuvent être équipées.
Cette innovation est particulièrement recommandée pour les installations de bâtiments neufs, car elle est plus difficile à installer sur des bâtiments existants (problème de stabilité et d'insertion).
On estime que 40% des bâtiments neufs construits chaque année pourraient être équipés, soit environ 1,2 millions de m2 potentiels par an en France pour l'élevage bovin.
Les principales contraintes sont l'orientation des bâtiments d'élevages bovins, qui ne sont pas exposés directement au sud, et la pente des toitures qui est plutôt à 25%, ce qui réduit la rentabilité d'environ 10%. Selon la situation géographique, le coût du raccordement au réseau électrique peut également être un frein.
Un "outil d'aide à la décision" est disponible pour les éleveurs et leurs conseillers. Les fermes expérimentales, de plus en plus équipées, permettent également de fournir des références et des conseils.
BovINE - Beef Innovation Network Europe
Ongoing | 2020-2022
- Main funding source
- Horizon 2020 (EU Research and Innovation Programme)
- Geographical location
- Ireland