Introduction 2 As regards the residue of separation/screening (under screening material), this residue derives from the process of mechanical processing of crus
Introduction 2
As regards the residue of separation/screening (under screening material), this residue derives from the process of mechanical processing of crushed forest biomass to obtain a high quality wood chips for a higher efficiency of biomass plants and therefore a lower fuel consumption. This process of improvement of wood chips is necessary to reduce the content of unburnt elements (ash) more present in bark and wood dust. The sifting operation results in a wood chip with a reduced emission impact in terms of CO2 and particulates. The sifting operation consists in separating the particles with a finer size (under screening material) and mainly consisting of organic and mineral material from wood chips intended for combustion or gasification plants. This material has a fine grain size and is characterized by a high ash content (variable depending on the wood species and the percentages of leaves, branches and bark) creating the greatest problems and inefficiencies in the energy conversion phase. This residue, currently unused and therefore subject to disposal, if properly separated and managed it can become an important resource able to bring back carbon to the soil through its inclusion in a composting cycle leading to the production of soil improver. The objective to be pursued will be to contribute with the new product to the improvement of the chemical-physical characteristics of the soil, reintroducing the residue in the carbon cycle, without going through the combustion process.
Introduzione 2
Per quanto riguarda il residuo della separazione/vagliatura (sottovaglio), questo residuo deriva dal processo di lavorazione meccanica delle biomasse forestali triturate per ottenere un cippato di elevata qualità per un maggiore rendimento degli impianti a biomassa e quindi un minore consumo di combustibile. Questo processo di miglioramento del cippato si rende necessario per ridurre il contenuto di elementi incombusti (ceneri) maggiormente presente nelle cortecce e nelle polveri di legno. Dalla operazione di vagliatura ne deriva un cippato con un ridotto impatto emissivo in termini di CO2 e particolato. L’operazione di vagliatura consiste nel separare quindi le particelle con una pezzatura più fine (sottovaglio) e prevalentemente costituite da materiale organico e minerale dal cippato destinato agli impianti di combustione o gassificazione. Questo materiale ha una granulometria fine e si caratterizza per un elevato contenuto di ceneri (variabile a seconda della specie legnosa e delle percentuali di foglie, rami e corteccia) creando i maggiori problemi e inefficienze nella fase di conversione energetica. Questo residuo, al momento non utilizzato e quindi oggetto di smaltimento, se opportunamente separato e gestito può diventare un’importante risorsa in grado di riportare carbonio al suolo attraverso il suo inserimento in un ciclo di compostaggio che porti alla produzione di ammendante. L’obiettivo da perseguire sarà quello di contribuire con il nuovo prodotto al miglioramento delle caratteristiche chimico-fisiche del suolo, reintroducendo il residuo nel ciclo del carbonio, senza passare attraverso il processo di combustione.
Res4Carbon_Enhancement of forest residues for carbon storage
Completed | 2019-2022
- Main funding source
- Rural development 2014-2020 for Operational Groups
- Geographical location
- Italy